The modern society has brought with it both benefits and disadvantages. Some of the benefits include job creation and lower cost of producing goods. This has helped to lower the cost of living in many places in the world. However, this increased production has led to the flooding of the food market with processed foods that are highly dangerous to the teeth. This is because the oral bacteria uses these sugars to produce acid that causes damage to the hard tooth structure. At times the damage if not addressed early enough may lead to a situation where the tooth may have to be extracted. When this happens, the patient is left with a gap. If he decides that he wants to replace that missing tooth, one of the suitable options to consider is by using dental implants falls church va.
Root devices are medical parts that are made under very clean conditions or are cleaned after manufacture is complete. This ensures that they do not infect the tissues into which they will be fitted. They help in substituting natural teeth which have already been lost. During replacement of only one tooth, teeth next to the gap are not involved in supporting the implant directly. Tooth preparation is thus not done on them which maintains them in their natural strong condition.
Posts can be used to anchor a complete denture to the jaw bone so as to prevent it from coming off unnecessarily. The lower complete dentures are more commonly supported with implants since the lower alveolar bone does not provide good support for the dentures. This is caused by bone loss as one ages.
Before a root post is put into the mouth for replacing a missing tooth, some assessment must be done. This is to ensure that the treatment will be successful. Some of it is done through asking questions about the health condition of the patient. Another form of assessment is done through visually examining the oral tissues. Some assessment is also done by feeling the gums and bone by hand. It may also be necessary to use radiography for further assessment of the makeup of the bone.
All costs to be charged should be explained to the client. The dentist will only begin work if he is sure that he will be paid.
The dentist must decide on the type of post that he will use. There are different types in the market depending on the shape that they have and also the material used to manufacture them. Each one of these has benefits and disadvantages. The choice made will be determined by both the doctor's decision and patient condition.
The treatment begins by making a flap. A dental hand piece is then used with a bur to drill a hole in the bone. The hole is small at first and increases gradually as the size of the bur is changed from a small one to a larger one. It is very important to ensure that their is adequate cooling of the tissues in contact with the bur. This will prevent heat damage to these tissues.
The post which has been selected is placed into the hole created and the flap is restored to its initial site and sutured. After adequate healing with proper attachment between the post and bone, a denture or crown can be fitted onto the post.
Root devices are medical parts that are made under very clean conditions or are cleaned after manufacture is complete. This ensures that they do not infect the tissues into which they will be fitted. They help in substituting natural teeth which have already been lost. During replacement of only one tooth, teeth next to the gap are not involved in supporting the implant directly. Tooth preparation is thus not done on them which maintains them in their natural strong condition.
Posts can be used to anchor a complete denture to the jaw bone so as to prevent it from coming off unnecessarily. The lower complete dentures are more commonly supported with implants since the lower alveolar bone does not provide good support for the dentures. This is caused by bone loss as one ages.
Before a root post is put into the mouth for replacing a missing tooth, some assessment must be done. This is to ensure that the treatment will be successful. Some of it is done through asking questions about the health condition of the patient. Another form of assessment is done through visually examining the oral tissues. Some assessment is also done by feeling the gums and bone by hand. It may also be necessary to use radiography for further assessment of the makeup of the bone.
All costs to be charged should be explained to the client. The dentist will only begin work if he is sure that he will be paid.
The dentist must decide on the type of post that he will use. There are different types in the market depending on the shape that they have and also the material used to manufacture them. Each one of these has benefits and disadvantages. The choice made will be determined by both the doctor's decision and patient condition.
The treatment begins by making a flap. A dental hand piece is then used with a bur to drill a hole in the bone. The hole is small at first and increases gradually as the size of the bur is changed from a small one to a larger one. It is very important to ensure that their is adequate cooling of the tissues in contact with the bur. This will prevent heat damage to these tissues.
The post which has been selected is placed into the hole created and the flap is restored to its initial site and sutured. After adequate healing with proper attachment between the post and bone, a denture or crown can be fitted onto the post.
About the Author:
When you want to find out information about dental implants Falls Church VA locals should visit our web pages online today. You can see details at http://tysonsdentalcenter.com now.
No comments:
Post a Comment