Athletes or people who have a severe case of flat feet would usually wear some custom made insoles with an arch support in order to be able to make up for their flat arch. Now although usually these special types of insoles are made by professional manufacturers, they can actually be made at home. One can make handmade orthotics if his case is not very severe like if he just has a low arch.
So basically, in order to make one of these things, it is very important to have the necessary supplies. Basically, one would be needing a couple of existing insoles that would come from old shoes. One has to also make sure that the sizes of all the insoles are the same.
The next thing that he would have to get would be a glue that is waterproof or better yet, super glue that can really stick. In order to cut up the insoles, one will be needing a pair of really sharp scissors because insoles may be tough to cut. As long as one has these things, then he may start getting to work on that insole.
So the very first thing to do would be to get at least two soles together and put one on top of the other. As stated above, make sure that all the soles are exactly the same size. From there, try to find the area where the arch of the foot is held.
Once that part has already been found, then the next thing to do would be to cut out that part using the pair of scissors that was acquired earlier. After that, one has to now make sure that the cut part will match the insole, if not, then maybe a bit more cutting will have to be done. Once that has already been done, then one can now glue the cut part to the insole.
After that has already been done, then one just has to wait for the glue to dry before he tries it out. Of course as stated above, the best glue for this type of project would be super glue. It is this glue that is the stickiest as well as the most effective and it dries really fast.
Now if one would want to make his arch support taller than it already is, he can actually do so by adding another sole part to the insole. Now he has to get the third insole and just what he did a while ago. Once he has done that, he just once again has to let the glue dry and then try to walk with it.
Now making handmade orthotics at home as quite easy as one will be able to see. However, do not try to do this if the flat feet case is quite severe. These handmade ones should only be used for those whose cases are not severe as the severe cases would already need the custom made ones with specific measurements.
So basically, in order to make one of these things, it is very important to have the necessary supplies. Basically, one would be needing a couple of existing insoles that would come from old shoes. One has to also make sure that the sizes of all the insoles are the same.
The next thing that he would have to get would be a glue that is waterproof or better yet, super glue that can really stick. In order to cut up the insoles, one will be needing a pair of really sharp scissors because insoles may be tough to cut. As long as one has these things, then he may start getting to work on that insole.
So the very first thing to do would be to get at least two soles together and put one on top of the other. As stated above, make sure that all the soles are exactly the same size. From there, try to find the area where the arch of the foot is held.
Once that part has already been found, then the next thing to do would be to cut out that part using the pair of scissors that was acquired earlier. After that, one has to now make sure that the cut part will match the insole, if not, then maybe a bit more cutting will have to be done. Once that has already been done, then one can now glue the cut part to the insole.
After that has already been done, then one just has to wait for the glue to dry before he tries it out. Of course as stated above, the best glue for this type of project would be super glue. It is this glue that is the stickiest as well as the most effective and it dries really fast.
Now if one would want to make his arch support taller than it already is, he can actually do so by adding another sole part to the insole. Now he has to get the third insole and just what he did a while ago. Once he has done that, he just once again has to let the glue dry and then try to walk with it.
Now making handmade orthotics at home as quite easy as one will be able to see. However, do not try to do this if the flat feet case is quite severe. These handmade ones should only be used for those whose cases are not severe as the severe cases would already need the custom made ones with specific measurements.
No comments:
Post a Comment